Home page
Our products
GELCOAT RESTORER
Home page
Products
F.A.Q
Buy online
Contact
Protect / Varnish
Remove/Clean/Restore
Treat / Paint
Owatrol Original
MSDS
Product information
Where to buy
Become a distributor
Testimonials
Our Facebook Site
Tweet
Color restorer for plastics and gelcoats
GELCOAT RESTORER
Technical Data Sheet (pdf)
Safety data sheet
Where to find the product ?
PROPERTIES
Restores original color and dries out to a tough flexible finish.
Long lasting and penetrates deep into gelcoat.
Eliminates the need for waxes and polishes that sit on surfaces and dry out quickly.
SURFACE PREPARATION
Rinse the surface with fresh water.
Remove dirt and heavy oxidation by scrubbing with
DECK CLEANER
per label instructions.
Allow surface to completely dry.
Do not apply in direct sunlight.
APPLICATION
Use as is, do not thin. Saturate a SOFT cloth with GELCOAT RESTORER and wipe it on.
With a SOFT cloth, wipe off excess within 5 minutes.
Gently polish with a lint-free cloth to a new sheen.
TIP
Choose an area that can be managed within five minutes.
Excess Gelcoat Restorer that dries on the surface may be removed with
MARINE STRIP
per label instructions.
NOTE
Rags soaked in GELCOAT RESTORER may spontaneously catch fire if improperly discarded.
Rags must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.
Information :
Coverage :
18m²/l - 194 sq/ft
Application tools :
Brush - Rag
Application temperature :
+5°C to +35°C
Working time before wiping:
10-20 min.
Clean-up :
Mineral-Spirits
Container size :
0.5 LITER (0.53 U.S QUART)
1 LITER (1.06 U.S QUART)
© HUEHN & PARTNERS - "OWATROL ASIA-PACIFIC" - PO Box 227 - Cannonvale QLD 4802 - Australia -
Legal notices